[Callisto]

If you want to use it the way it's supposed to work, then you did. It's impossible to get the trigger buttons to work on the wireless version with the adapter, I had to go into FFXIPadConfig and set the Ctrl/Alt functions to the 2 shoulder buttons instead of the triggers, b/c FFXI is just not able to recognize the Z-axis function, which is what the triggers are set to using the wireless adapter, and I for my life can't find a way to change that.

It's a bit awkward especially when I dualbox using 2 controllers and the left trigger button is so ingrained in my head as the auto-run button, but you get used to it after a bit.

[Zayl]

-.-; Okay. So after going at this for about 3 hours now, I've run into a problem I can't find anywhere else. I followed the instructions in the pdf. Ran into a problem that I couldn't find the xbox 360 drivers in the hardware manager. Skiped that. Went through and finished it. FFXIconfig said that the buttons were being pressed. I went woot, it's working. Got past POL into FFXI... Nothing did anything. Config said it worked. So I went back to the hardwear manager. Looked a bit harder, and found it wasn't in the place that the PDF said it was for me. Updated as I should have. Now, I'm still having the same problem. FFXIconfig says all the buttons are working with the test, but get into FFXI and still nothing. None of them work at all, not even the ones that are supposed to work normally. It may be noteworthy that I'm using the windower. Any help would be greatly appreciated. ; ;
______________________________
Prolly shoulda mentioned. I use a Wired Xbox 360 controller and am running Windows XP

[Temil2006]

someone else posted on here the drivers for the wireless controlers previously. Well, same creators came out with a set for the wired versions also. Seems to give more options then the XBCD+, XBCD, and XBCD360 drivers currently out, and easier to install as well. Just open device manager, pick to update the drivers for the microsoft wired controler, and point it to the INF. The only drawback is that just like with all other modifed drivers.. the headset doesnt seem to get reconized. Ohh well, at least rest of all funtions work. hope this help!

All OSs (vista, xp, etc)
wired xbox 360 controler drivers
http://www.katch.ne.jp/~morii/x360c/X360C.en.zip

[Boundsoul]

okay, i downloaded the pdf, but when i click the link to download the xbcd its goes to a junk search site. does anyone know if its been moved or what?

[m00gl£]

is there drivers for vista 64bit =3

[Masta680]

If I'm reading right it don't work on 64 bit windows my computer has i 8gigs ram and 32 bit windows can only do 4 gig when 64 bit can do 128 does anyone know where to get xbcd x64

[Sethe]

Here's the URL to some updated drivers:

Xbox 360 コントローラー用デバイス ドライバ

[Reilk]

SYSTEM INFO:

• Windows Vista x64
• Wireless Controller & USB Receiver
• Ready Driver Plus
• 2007 JP x64 Wireless Driver

Ok, so I've taken quite some time to try and figure out and set up my new controller for FFXI, but I've run across some problems.

At first, I was using the supplied, official Microsoft drivers and calibrated my sticks using the properties feature in joy.cpl. I tested my controls out in the same program, and then proceeded to boot up the game only to realize "Hey, my controller isn't responding at all."

So I did a "quick" search and found several references, including this thread, and read up on the various ways to try and get a working button layout.

Now, I don't have any sort of wired connection, so the most recent JP drivers and XBCD were out of the question, and I'd rather not install any unnecessary programs (xpadder) that would create a hassle for my play.

Out of all the various threads, Edgetheninja/ZeRoLiMiT seemed to be a reoccurring source of helpful information and he just so happened to share my OS/controller combo. So after several hours and a good half-baker's-dozen reboots, I had both the correct JP drivers and RD+ installed and ready to go.

With everything seemingly set to go, I opened up FFXI Config and went to Gamepad Settings to emulate the 360's natural button scheme. Got everything paralleling its regular function and went to Test Gamepad, only to find out that my sticks' calibration were way out of whack, hanging to a single corner and unable to offer the full 360 degrees as normal.

So, after numerous attempts at fiddling with the sticks' axis, checking and unchecking inversion, and purposefully inputting irregular calibration data in FFXI Config itself, I still can't get my calibration back to a regular setting.

So please, I need help. I'm pretty much fed up with it at this point.
Should I reinstall the MS drivers and try to uncalibrate my controller to see if that magically fixes things once I get them back to my current settings? Or do any of you have a better plan or idea?

[aaronmorg]

System:
Vista 64 bit
WIRED Controller
4 gigs Ram
idk what video card but FF XI runs fine...

Ok. I must be a complete newb... I have tried EVERYTHING! I have tried MS drivers, XBCD (many versions), Xpadder, and even the japanese driver for a WIRELESS remote...

Could someone please hold my n00by hand and walk me through the steps to getting the god awful piece of gaming equipment to work.

When I go to Gaming Controllers on my control panel, it registers that my controller is working (sticks, butons, etc.) But when I go into FFXI Config, the buttons or sticks do not register. I have tried installing the drivers and the ones I install never show up on the list when I'm updating drivers.

If someone could PLEASE help me. I will give you my first born... please...

[Kailea]

Originally Posted by aaronmorg

System:
Vista 64 bit
WIRED Controller
4 gigs Ram
idk what video card but FF XI runs fine...

Ok. I must be a complete newb... I have tried EVERYTHING! I have tried MS drivers, XBCD (many versions), Xpadder, and even the japanese driver for a WIRELESS remote...

Could someone please hold my n00by hand and walk me through the steps to getting the god awful piece of gaming equipment to work.

When I go to Gaming Controllers on my control panel, it registers that my controller is working (sticks, butons, etc.) But when I go into FFXI Config, the buttons or sticks do not register. I have tried installing the drivers and the ones I install never show up on the list when I'm updating drivers.

If someone could PLEASE help me. I will give you my first born... please...

have you checked the box that says enable game pad? ;p

if so.... then I don't know what to tell ya, other then go get another controller, or something.

[aaronmorg]

I ended up figuring out Xpadder. not how I wanted to get it working, but it works, I suppose

Now I have an xbox controller-shaped portion of my keyboard :D